How To Change Spark Plugs 2013 Hyundai Elantra
What you will need
- Hyundai Spark Plugs
- Spark Plug Socket
- Ratchet
- Ratchet Socket Extension
- Torque Wrench
Procedure
-
Park, your Hyundai in a safety area, set the parking brakes, and allow the engine to cool down.
-
Open HoodSide by side, open the hood. Clean the surface area nigh the spark plugs and around the ignition coils.
- Disconnect the negative battery concluding.Since you will be working with the electrical system, it is safe to disconnect the negative battery terminal.
- Remove the engine embrace. It is held in place with up to four 10mm bolts that you can access from the top of the engine. If at that place are no bolts on peak of the engine cover, pop up the cover.
-
Remove ignition coils.Side by side, remove the engine cover and disconnect the ignition coils. Unplug the ignition coil connector by pressing the locking tab then pulling the connector abroad.
- Use a ten mm socket to loosen the bolt that secures the coil in place. This vehicle uses a coil-on-plug design. Therefore y'all volition accept i coil on each spark plug. Once the bolt and connector accept been removed, pull the ignition coils out. If the ignition whorl refuses to come up, try twisting it slightly, then attempt lifting it up and out.
-
Remove spark plug.Blow dirt away from the spark plug recess before you remove the spark plugs.
-
Install new spark plugs.It is time to install the new spark plug. It is a good do to inspect the gap using a spark plug gapping tool. Sure spark plugs may come pre-gapped, while others such as copper plugs should be gapped.
- Install the ignition coils and connect the electric connector to each coil. Reinstall the engine cover.
- Remove all tools from the engine.
- Start the engine and cheque the operation of the vehicle.
If the check engine lite was on due to a bad spark plug or ignition curlicue, clear the codes with an OBD-II scanner.
What are the best spark plugs for Hyundai?
The original spark plugs installed on Hyundai equipped with the four-cylinder engine are NGK, or Denso iridium coated spark plugs.
Beneath we have listed two highly rated spark plugs that volition fit Hyundai vehicles.
- Denso Iridium Long Life Spark Plugs for Hyundai Elantra SX9164
- NGK Iridium IX Plug Spark Plugs for Hyundai Elantra
How ofttimes should I change the spark plugs on my Hyundai Elantra?
Co-ordinate to the owner's manual of a 2016 Hyundai Elantra, the spark plugs should be replaced every 105,000 miles or 84 months. Keep in mind that depending on your driving style and weather, the spark plugs may final longer or need to be replaced as early every bit threescore,000 miles. The original spark plugs are iridium coated.
What are the OEM spark plugs installed on Hyundai Elantra?
- The OEM Hyundai spark plugs are NGK or Denso. Which i is installed on your car depends on the market where your Hyundai was sold?
What is the Hyundai Elantra 2011-2016 spark plug gap?
- Recommend Hyundai spark plug gap range: .035-.042
What is Hyundai Elantra spark plug function number?
- Hyundai 18846-11070 1884611070
How much does it cost to modify the spark plugs on a Hyundai Elantra?
- The average cost to change the spark plugs at the Hyundai dealer or an motorcar mechanic is betwixt $180-$300. DIY cost (if you already have the tools) is under $50.
How To Change Spark Plugs 2013 Hyundai Elantra,
Source: https://www.youcanic.com/wiki/hyundai-spark-plug-replacement
Posted by: hewitthiliscion1942.blogspot.com
0 Response to "How To Change Spark Plugs 2013 Hyundai Elantra"
Post a Comment